|
CH Products' LP and P-Series trackballs are designed for panel mount applications requiring a responsive and
accurate pointing device. Constructed with stainless steel shafts and bearings and high-end optical encoders,
LP and P-Series trackballs are ideally suited for kiosks and medical imaging systems. Available in three sizes,
optional features include backlit illumination, pushbutton strips as well as choice of protocol.
Key Features
• Three sizes available
• Panel mount design
• Backlit illumination available
• Several protocol options
• Additional button strips available
• Available with USB (Mac USB compatible)
• RoHS compliant
• Environmental Protection Classification (IP Rating): contact factory
|
|
Back
• Non-contacting optical encoders
• Click lock inputs (all protocol formats)
• Polished stainless steel shafts
• Cartridge stainless steel bearings
| |
LP100 |
LP150 |
P200 |
| Ball Diameter: |
1.00" |
1.50" |
2.00" |
| Ball Rotation (in all directions): |
Continuous |
Continuous |
Continuous |
| Tracking Force: |
15g |
10g |
10g |
| Weight: |
33.5g |
118.5g |
257.5g |
| Life Cycle (ball rotations): |
5,000,000 |
5,000,000 |
5,000,000 |
| Operating Temperature: |
-40ºC to +80ºC |
-40ºC to +80ºC |
-40ºC to +80ºC |
|
USB
|
|
PS/2 (2/3BTN PS/2)
|
|
Microsoft (2BTN Serial)*
|
|
Quadrature (Bus for DT225)
|
|
Sun Workstation*
|
|
Trackstick: (Joystick Emulation)
|
*not avialable on LP100
| USB |
|
| Input: |
4.00V - 5.25V @25mA max (+30mA for backlit illumination option) |
| Output: |
USB 1.1 |
| PS/2 (2/3BTN PS/2) |
|
| Input: |
5.00V @ 25mA max (+30mA for backlit illumination option) |
| Output: |
CMOS/TTL |
| Microsoft Serial* |
|
| Input: |
DTR/RTS @ 14 mA max (+30mA for backlit illumination option) |
| Output: |
RS-232, Serial |
| Quadrature |
|
| Input: |
5.00V @ 30mA max (+30mA for backlit illumination option) |
| Output: |
Quadrature Waveforms |
| Sun Workstation (Mouse Systems Serial) |
|
| Input: |
5.00 @ 30mA max (+30mA for backlit illumination option) |
| Output: |
CMOS/TTL |
*Note: Microsoft Serial Interface requires a customer supplied 5 volt supply for LED backlighting option.
|
LED backlighting:
|
Red, blue, nuetral, or green translucent Thermoset resin ball
|
| Additional pushbutton switches:
|
Two, three, or four* button (*USB only)
|
Connector cables
|
|
Conformally coated PCB
|
|
Two, three, or four (USB only) buttons
|
|
Tactile feedback
|
|
Normally open momentary contact switch
|
|
5,000,000 lifecycle rating at 500mA at 12VDC
|
|
Black or gray button caps
|
|
Choice of convex or concave design
|
|
|
|
|
180º Horizontal to 90º vertical - Please specify when ordering
|
|
