|
Key Features
• Rugged, hand operated control
• Hall effect sensing
• Single axis friction clutch operation
• Optional mechanical detents with microswitches
• RoHS compliant
• 10 million life cycles
• Environmental Protection Classification (IP Rating): contact factory for further information
| Lever travel: |
70° (35° from center)
|
| Housing: |
High impact, glass-filled nylon |
| Breakout force: |
.581Nm |
| Operational force: |
.989Nm |
| Operating temperature: |
-40°C to +85°C |
| Life cycles: |
10 million |
| Supply voltage: |
5.0V |
| Center voltage: |
2.5V |
| Supply current: |
10mA max |
| Output current: |
2mA max |
| Output tolerance: |
±2% |
Configuration Options
| 0V to 5.0V |
| 0.25V to 4.75V |
| 0.5V to 4.5V |
USB
Universal Serial Bus provides USB 1.1 interface, no driver is needed.
CANbus
Provides J1939 interface and requires Sensor Output Option (0.25V - 4.75V). Contact technical support for configuration chart.
Dual Decode
Provides center detect function and monitors dual sensors. If the sum
and the difference of the sensor outputs vary by more than 9%, the
circuit becomes electrically LO. Requires dual sensors and output
option 0.5V to 4.5V.
Voltage Regulator
Used when input or output voltage is greater than 5V or when bipolar output is required. Contact technical support for available configurations.
| Mechanical detents: |
Zero to six |
| Micro switches (zero to three): |
Available normally open (n.o.) or normally closed (n.c.). |
| Mounting Options : |
Under panel mounting is available for Ball Tip, Short Stock Grip and Stock Grip configurations. |
HFX Single Axis Throttle Stock Grip Technical Drawing
HFX Single Axis Throttle Palm Grip Technical Drawing
HFX Single Axis Throttle Multifunction Handle Technical Drawing
|
