|
|
The HFX Series II joystick is a long life cycle, Hall effect controller providing reliable multi-axis finger positioning
control. Available in single, dual, and triple axis configurations, HFX Series II joysticks are ideal for clean environment,
finger operated applications requiring increased durability and reliability. Widely used applications include on-road enclosed
cabin vehicles, electric wheelchairs and kiosk integration.
Key Features
• Finger positioning control
• Hall effect sensing
• Available with USB
• Single, dual or triple axis control
• RoHS compliant
• 10 million life cycles
• Environmental Protection Classification (IP Rating): contact factory
|
|
| Joystick Travel: |
40° (20° from center) |
| Centering: |
Single spring, omnidirectional |
| Housing: |
High impact glass-filled nylon |
| Operation force: |
0.257 Nm |
| Breakout force: |
0.128 Nm |
| Maximum force: |
0.385 Nm |
| Operating temperature: |
-40°C to 85°C |
| Life cycles: |
10,000,000 |
| Supply voltage: |
5.0V (Except w/ voltage regulator option) |
| Center voltage |
2.5V |
| Supply current: |
10mA max/axis |
| Output current: |
2mA max/axis |
| Output tolerance: |
±2% |
Configuration Options
| 0V to 5.0V |
| 0.25V to 4.75V |
| 0.5V to 4.5V |
USB
Universal Serial Bus provides USB 1.1 interface, no driver is needed.
Analog Deadband
Assures return to center voltage
Center Detect
Produces an electrical HI signal when stick is moved off center and produces an electrical LO signal if the
sensor output voltage deviates from range (<0.5V or >4.5V).
Dual Decode
Provides center detect function and monitors dual sensors. If the sum and the difference of the sensor
outputs vary by more than 9%, the circuit becomes electrically LO. Requires dual sensors and output
option 0.5V to 4.5V.
Joyball
Cursor emulation available for USB or Sun.
Voltage Regulator
Used when input or output voltage is greater than 5V or when bipolar output is required.
Contact technical support for available configurations.
CANbus
Provides J1939 interface and requires Sensor Output Option (0.25V - 4.75V).
Contact technical support for configuration chart.
Friction Clutch
The joystick does not mechanically return to center, maintains present position. Requires "round" limiter plate option.
HFX Series II Cutout and Mounting Dimensions
Technical Drawings
Model-1100 Option 0.pdf
Model-1100 Option 1.pdf
Model-1200 Option 2.pdf
Model-1300 Option 3.pdf
Model-1300 Option 6.pdf
Model-1400 Option 4.pdf
Model-1400 Option 5.pdf
|
|
