The HFX Series I joystick is a contactless, multi-axis controller providing long life finger positioning control.
A compact, low-profile joystick utilizing non-contact
Hall effect technology, the HFX Series I joystick is designed for low operating force, clean environment
applications requiring enduring accuracy and precision. Available with several ergonomic handles and in single,
dual or triple axis configurations, typical uses include CCTV equipment, robotics, factory automation, electric
wheelchairs and medical devices.
Key Features
• Finger positioning control
• Hall effect sensing
• Available with USB
• Single, dual or triple axis control
• RoHS compliant
• 10 million life cycles
• Environmental Protection Classification (IP Rating): contact factory for further information
| Joystick travel: |
36° (18° from center)
|
| Centering: |
Single spring, omnidirectional |
| Housing: |
High impact, glass-filled nylon |
| Breakout force: |
.109Nm |
| Operation force: |
.151Nm |
| Maximum force: |
.169Nm |
| Operating temperature: |
-40°C to +85°C |
| Life cycles: |
10 million |
| Supply voltage: |
5.0V |
| Center voltage: |
2.5V |
| Supply current: |
10mA max/axis |
| Output current: |
2mA max/axis |
| Output tolerance: |
±2% |
Configuration Options
| 0V to 5.0V |
| 0.25V to 4.75V |
| 0.5V to 4.5V |
USB
Universal Serial Bus provides USB 1.1 interface, no driver is needed.
Analog Deadband
Assures return to center voltage
Center Detect
Produces an electrical HI signal when stick is moved off center and
produces an electrical LO signal if the sensor output voltage deviates
from range (<0.5V or >4.5V).
Dual Decode
Provides center detect function and monitors dual sensors. If the sum
and the difference of the sensor outputs vary by more than 9%, the
circuit becomes electrically LO. Requires dual sensors and output
option 0.5V to 4.5V.
Joyball
Cursor emulation available for USB or Sun.
Voltage Regulator
Used when input or output voltage is greater than 5V or when bipolar output is required. Contact technical support for available configurations.
Friction Clutch
The joystick does not mechanically return to center, maintains present
position. Available with "round" or "slotted" limter plate.
Desktop Housing
Desktop housings are available for every HFX Series I joystick. Additional options include USB interface. View HFX Series I joystick housing options.
Mounting Options
View HFX Series I joystick mounting options.
Technical Drawings
Model-1100 Option 0.pdf
Model-1100 Option 1.pdf
Model-1200 Option 2.pdf
Model-1300 Option 3.pdf
Model-1300 Option 6.pdf
Model-1400 Option 4.pdf
Model-1400 Option 5.pdf
|
